Lowongan Kerja Pertambangan PT. Radiant Utama Interinsco November 2013

Soal-Soal Test BUMN
Lowongan Kerja Pertambangan PT. Radiant Utama Interinsco November 2013. PT. Radiant Utama Interinsco yang bergerak dalam bidang: Inspection and Certification, Non Destructive Testing, OCTG, Maintenance, Enviromental Study, Training and Stuffing juga membutuhkan tenaga kerja untuk posisi-posisi sebagaimana yang tertera di bawah ini. Terdapat kualifikasi minimum yang dibutuhkan untuk menempati posisi tersebut. Bagi anda yang memenuhi kualifikasi tersebut bisa segera mengirimkan curriculum vitae secara online ke alamat email yang telah disediakan.

PT. Radiant Utama Interinsco

11. Liquid Mud Plant Supervisor
12. Waste Management Supervisor
13. Fluid & Cement Laboratory Technician
14. Safety Method Coordinator
15. Special Project Engineer
16. Technical Contract Specialist
17. Contract Engineer

 
3.1.11. Liquid Mud Plant Supervisor (field)
Educational Background : Graduate from University.
Minimum Qualifications :
• Work Drilling Fluids and or Cementing for 3 years in operator or Service Company.
• Technical skills required in WBM, OBM and Cement.
• Familiar with Fluids and cement analysis and API procedures.
• Technical skills in large volume Mud mixing and transfer supervision on Contractor base.
• Knowledge of drilling operation in swamp and offshore area.
• Fluent English speaking and writing.
3.1.12.Waste Management Supervisor (field)
Basic Function & Scope
• Supervise all operations related to Fluids and Cuttings treatment with respect to the HSE company rules
• Perform quality insurance of treatment process, stock inventory and consumption, field analysis and contractor reporting.
• Prepare daily waste report, phase and final reports on every well drilled.
• Prepare requests for cuttings barges and follows up closely to ensure free of rig lost time due to waste logistic.
• Participate to ensure that all fluids and cuttings treatment related operations on the rig are carried out to minimize waste generation.
• Optimize product usage and minimize waste at a minimal cost without impairing safety and drilling performances.
• Control and maintain Oil on drilled cuttings maximum 10% by weight of dry cuttings.
• Control and maintain water discharge maximum 25 ppm (as per regulation).
Activities/Environment/Major Problems
• Environment & Major Problems:
• The job is related to drilling operation on 24 hours basis requiring initiative and proactive action to solve and support any occurrences on rig site to avoid delay of operation.
• HSE matters are primary importance, particularly in the Mahakam delta specially the environment.
• Good reporting is essential for the lessons learnt and follow up of daily operations.
• Activities:
• Ensure that fluids & cuttings management plan and specific procedures are available, understood and adhered to by personnel involved.
• Optimize the management of fluids & cuttings treatment services in the field. Coordinate actions between the different parties involved in order to ensure that the best procedures are followed.
• Ensure that Company and Contractor HSE standards are respected by the individuals executing the fluids and cuttings treatment contract..
• Perform quality control.
• Assist specific operations on treatment sites when required.
• Follow up of all fields operations.
• Control logistics and inventory management.
• Review and report analyses of any equipment failure or non-conformance services..
• Ensure permanent quality of data reporting.
• Ensure that all required analysis (daily and official) are made on time, on samples correctly taken, properly labeled and that field analysis are done with high standard of quality.
• Monitor oil on cuttings concentration and oil in water analysis to ensure compliance with the enforced regulations.
• Monitor and adjust the solid control equipment performance of the rigs.
• Report and exchange information.
Principal Accountabilities
• Ensure the implementation of standard waste management operation on the rig.
• Perform all waste reports and oil in water analysis reports.
• Ensure that health safety and environment are in accordance with rules for Fluids and cuttings treatment.
• Ensure safe, efficient and cost effective drilling operations
WORKSITE : Handil or POSB or Pendingin
Work Schedule : Rotational Basis (14/14 or 28/28)
Educational Background : Graduate from University.
3.1.13. Drilling Fluid & Cement Laboratory Technician (field)
Educational Background : Graduate in Chemistry.
Minimum Qualifications :
• Work as a Laboratory Technician for 3 years in operator or Service Company.
• Technical skills required in WBM, OBM and Cement.
• Familiar with Fluids and cement analysis and API procedures.
• Technical skills in large volume Mud mixing and transfer supervision on Contractor base.
• Knowledge of drilling operation in swamp and offshore area.
• Fluent English speaking and writing.
3.1.14. Safety & Method Co-ordinator (office)
Educational Background : Graduate from University.
Minimum Qualifications :
• 3 years experience required in drilling / completion / testing / work-over activity with field exposure or operational HSE function with field exposure and good knowledge of well construction activities.
• Excellent communication skill is necessary.
• Supervisory and leadership skills are mandatory.
• Fluent English speaking and writing.
3.1.15. Special Project Engineer (office)
Educational Background : Graduate from University.
Minimum Qualifications :
• Recognised experience in re-entry well, development/delineation, HPHT, horizontal well.
• Technical skills required in directional drilling and horizontal well design, in multilateral well will be a plus.
• Field experience is necessary.
• Familiar with drilling software (hydraulic, torque and drag, BHA, well path design) and all software under Windows NT.
• Fluent English speaking and writing.
3.1.16. Technical Contract Specialist (office)
Minimum Qualifications :
• At least 5 years specific experience in managing the contracting procurement.
• Possessing strong knowledge of contractual matters and fully acquainted with prevailing policy & regulation.
• Very good English skills both written and spoken.
• Familiar with Oil & Gas business contract service standards.
• Familiar with Oil & Gas operations and techniques
3.1.17. CONTRACT ENGINEER (office)
Minimum Qualifications :
• Bachelor degree, preferably in engineering
• At least 1 year solid experience managing high value contract and procurement, preferably with Drilling contracts management process.
• Having good knowledge on Electronic Resource Planning (ERP) system and on hands experience of using one.
• Possessing strong knowledge on the contractual matters and fully acquainted with prevailing policy & regulation (PTK 007).
• Good English skills both written and spoken.
• Familiar with Oil & Gas business contract service standards.
• Excellent Team Worker.
Please send your CV to:
recruitment@supraco.com
 
Posting date: October 25, 2013
Expiry date: November 08, 2013
Jika anda belum memiliki kualifikasi seperti yang diminta pada Lowongan Kerja Pertambangan PT. Radiant Utama Interinsco November 2013 tersebut di atas, mungkin kualifikasi anda sesuai dengan persyaratan yang diminta pada Lowongan Kerja Pertambangan November 2013 PT Radiant UtamaInterinsco. Jangan ketinggalan informasi Lowongan Kerja Terkini 2014, silahkan ikuti terus informasi lowongan kerja yang terkini di situs infokerja-terkini.blogspot.com ini.
Soal-Soal Test BUMN
Lowongan Kerja Pertambangan PT. Radiant Utama Interinsco November 2013 | Lowongan Kerja Terbaru | 5

0 comments:

Post a Comment